[code][/code]

Search found 16 matches

Go to advanced search

by wildeone2
Fri Nov 04, 2016 11:43 pm
Forum: Wanted
Topic: wanted acool monsta 480 rad
Replies: 0
Views: 775

wanted acool monsta 480 rad

wanted acool monsta 480 rad
by wildeone2
Fri Nov 04, 2016 11:28 pm
Forum: Overclocking & Benchmarking
Topic: 5960 overclock thoughts on tweaking it
Replies: 14
Views: 3222

Re: 5960 overclock thoughts on tweaking it

what motherboard are you using , first I would set mem to xmp, 125 strap, 34 x cpu ratio, 1.3v cpu, and see if you can boot to bios, then work down or up to get your cpu volts, you could just have a bad 5820,i would set for the lower clock speed first {4250} as most 5820 should do this with ease, th...
by wildeone2
Thu Oct 20, 2016 10:17 pm
Forum: Overclocking & Benchmarking
Topic: 5960 overclock thoughts on tweaking it
Replies: 14
Views: 3222

Re: 5960 overclock thoughts on tweaking it

when it comes was thinking of putting the chiller just before the rad in the loop and then seeing if I could keep stardard settings no chiller then turning on for playing around don't know if that will work or not, think I will start with a dew point calculator and setting it just above the dew poin...
by wildeone2
Thu Oct 20, 2016 10:10 pm
Forum: Overclocking & Benchmarking
Topic: 5960 overclock thoughts on tweaking it
Replies: 14
Views: 3222

Re: 5960 overclock thoughts on tweaking it

mines only a titan 300 265w cooling , I didn't want a lot of noise ,was gona play with my 5960 see what I can get, should be here this week, is your cpu a j batch one mine is and is a good overclocker , aquatuning have got some good deals on those chillers at the moment if you look in clearance they...
by wildeone2
Mon Oct 17, 2016 8:23 pm
Forum: Overclocking & Benchmarking
Topic: 5960 overclock thoughts on tweaking it
Replies: 14
Views: 3222

Re: 5960 overclock thoughts on tweaking it

just managed to get hold off a new Hailea Ultra Titan 300 chiller don't know anything about them but we will see if there any good if not I will sell it of on ebay
by wildeone2
Sat Oct 08, 2016 10:52 pm
Forum: For Sale
Topic: EVGA G2 1300 Gold PSU - Watercooling and Braiding bits and bobs
Replies: 5
Views: 1680

Re: EVGA G2 1300 Gold PSU - Watercooling and Braiding bits and bobs

how much for the aquaaero what model is it? what size are the 6 pack fittings and how much thanks
by wildeone2
Wed Sep 28, 2016 9:04 pm
Forum: Overclocking & Benchmarking
Topic: 5960 overclock thoughts on tweaking it
Replies: 14
Views: 3222

Re: 5960 overclock thoughts on tweaking it

same as mate, lots to learn on the memory side, let us know when you get your fusion pot going would like to see what results you can get
by wildeone2
Sat Sep 24, 2016 11:56 pm
Forum: Overclocking & Benchmarking
Topic: 5960 overclock thoughts on tweaking it
Replies: 14
Views: 3222

Re: 5960 overclock thoughts on tweaking it

hi bud am using twin d5s in a xpsc dual bay reservoir a raystorm pro cpu block, a acool 480 rad and a coolgate 360 rad with 13/10 mm hard tube and I use ice dragon nano fluid, the d5s, one is for redundancy , haven't done much past few days not been well but will have a play tomorrow , those gigabyt...
by wildeone2
Tue Sep 20, 2016 10:41 pm
Forum: Overclocking & Benchmarking
Topic: 5960 overclock thoughts on tweaking it
Replies: 14
Views: 3222

Re: 5960 overclock thoughts on tweaking it

so played with the settings have got these so far 4.5 ghz 24/7 setup cpu is 1.235v bclk 125 xmp 3000 memory haven't touched the timings, cache x34 cache volts is 1.216 fully stable temps 34-36 idle 66-72 load 4.625 ghz cpu 1.25 bclk 125 xmp 3000 memory x34 cache 1.216v temps 36 idle 72 74 load stabl...
by wildeone2
Fri Sep 16, 2016 9:33 pm
Forum: Overclocking & Benchmarking
Topic: 5960 overclock thoughts on tweaking it
Replies: 14
Views: 3222

Re: 5960 overclock thoughts on tweaking it

cpu volts is 1.264, I played with the cache x34 cache voltage 1.25v does this seem right or is the volts to high? bclk is 125 , I can get 4.6 stable and 4.7 bench stable but not really played with the settings at the moment , cpu is a j batch did have problems with the parts as I had a faulty mboard...
by wildeone2
Fri Sep 16, 2016 9:14 pm
Forum: Overclocking & Benchmarking
Topic: 5960 overclock thoughts on tweaking it
Replies: 14
Views: 3222

5960 overclock thoughts on tweaking it

current overclocked to 4.5ghz idle sits at 34c underload 63- 69c now need to tweak the cache and the memory , on 125 bclk memory 3000 MHz set to xmp ideas best place to start
by wildeone2
Wed Sep 14, 2016 11:58 pm
Forum: Overclocking & Benchmarking
Topic: intel xtu
Replies: 3
Views: 1852

Re: intel xtu

update got my system back today, motherboard and memory replace and xtu now works as it should so was a faulty board ,the memory had a led gone u/s
by wildeone2
Mon Sep 12, 2016 9:07 pm
Forum: Overclocking & Benchmarking
Topic: Overclocking 6700k Water Cooled and EVGA 980 Superclocked 2.0 Tips
Replies: 5
Views: 1998

Re: Overclocking 6700k Water Cooled and EVGA 980 Superclocked 2.0 Tips

I overclocked my sons 6700k 4gz to 4.5 just changed his multipler, no adjustment need to cpu volts, using a gigabyte board fully stable and a 240 all in one watercooler hope this helps
by wildeone2
Mon Sep 12, 2016 8:52 pm
Forum: Overclocking & Benchmarking
Topic: intel xtu
Replies: 3
Views: 1852

intel xtu

any ideas why xtu dosent work properly on my asus rampage v extreme board wrong settings come up and I get message enable overclocking in bios a lot of the settings are greyed out
by wildeone2
Mon Sep 12, 2016 8:48 pm
Forum: New Recruits
Topic: *** Access to the MLG Members Area ***
Replies: 160
Views: 34914

Re: *** Access to the MLG Members Areas & Market Place ***

can I be add to the mlg members area thks
by wildeone2
Mon Sep 12, 2016 8:45 pm
Forum: New Recruits
Topic: hi to everyone
Replies: 6
Views: 3052

hi to everyone

my name is tony my main hobby is my pc, I have a asus rampage v extreme, 5960 cpu overclocked to 4.6 ghz. 16 gb dominator memory, wp100 case, evga 980ti graphics, twin d5 pumps, raystorm pro cpu block, 360 and 420 rads, hard tubbing, still not fully finished waiting for it to come back from scan aft...

Go to advanced search

cron