[code][/code]

Overclocking BSOD code list/help

Need some help? It could be here...
User avatar
nickolp1974
Officer Cadet
Officer Cadet
Posts: 1836
Joined: Wed Apr 23, 2014 7:08 pm
Location: In the Pub

Overclocking BSOD code list/help

Post #1 by nickolp1974 » Wed Apr 23, 2014 9:28 pm

Image

ANNOYING ISN'T IT!!, don't worry where here to help ;)



Just thought i'd share this list to help the ones that dont know

This list has been compiled to help when overclocking your system, if your experiencing BSOD's with a stock system, ensure that your drivers are upto date and that windows is fully updated. If problems still persist, running Memtest wouldn't be a bad idea.

Unless you have eagle eyes and are very quick to read the bsod code i would advise you to download a program called whocrashed or Bluescreen view is very good click to download your prefered choice
WhoCrashed
Bluescreen View
once you have had a bsod, boot back into windows run the program and click analyse then hey presto you have your code.

If you are not getting your codes you may have your minidump file disabled to enable follow instructions below

For win 7/8
1. Go to the Control Panel, choose 'System And Security', and then click 'System', and then click the 'Advanced System Settings' link.
2. In the opened window, click the 'Advanced' tab and then inside the 'Startup And Recovery' frame, click the 'Settings' button.
3. In the opened 'Startup And Recovery' window, there is 'Write Debugging Information' section. You should set the combo-box in this section to 'Small memory dump', and then click 'ok' to confirm the change

Should look like this

Image

To make the below codes more accurate make sure that all your drivers are upto date or that you are using known versions not to cause problems.
Also run memtest to rule your RAM out of the equation, unstable ram can cause many BSOD's.
Here is the DL link for this to install on a usb stick http://www.memtest.org/download/5.01/memtest86+-5.01.usb.installer.zip Latest memtest installer (27/09/2013)
Main Memtest webpage http://www.memtest.org/


BSOD codes for overclocking

0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is
on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
on i7 32nm SB, usually means too little vCore
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

BSOD Codes for SandyBridge

0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage



Haswell, according to a source from the R.O.G forums these codes still very much apply, but where it says QPI/VTT this can also mean SA/IO for this particular architecture.


Haswell-E

101 initially add more vcore but also possibly SA that needs tuning try +/- in small steps, 0.05v at a time, going larger and you could miss a stability sweetspot

.
Last edited by nickolp1974 on Sun Nov 02, 2014 9:08 pm, edited 1 time in total.


Image

User avatar
Gregster
Captain
Captain
Posts: 2883
Joined: Thu Apr 17, 2014 1:57 pm
Location: Harwich, Essex
Contact:

Re: Overclocking BSOD code list/help

Post #2 by Gregster » Wed Apr 23, 2014 10:02 pm

Nice info Nick and very handy.
Image
3930K @ 4.625 - Tri SLI Titans - RIVF - 16GB Avexir 2133Mhz
EVGA 1300W G2 - XSPC H2 case - Fully water cooled with EK/XSPC
Asus ROG Swift Monitor - Logitech G19/G502/G25 peripherals

User avatar
Frenzic
Warrant Officer
Warrant Officer
Posts: 1358
Joined: Wed Nov 21, 2012 12:01 am
Location: Woodbridge, United Kingdom

Re: Overclocking BSOD code list/help

Post #3 by Frenzic » Thu Apr 24, 2014 12:34 pm

Awesome, very handy and thanks for the share :)
i7-4930K @ 4.4GHz|ASUS RIVF|Gigabyte GTX 780 Ti WF OC SLI|
16GB HyperX Beast 2400MHz|Corsair H80i|Corsair RM1000|
OCZ-Vertex450 256GB SSD|Corsair Carbide 500R|BenQ XL2720T

User avatar
SuffolkBoy
El Presidente
El Presidente
Posts: 1585
Joined: Tue Nov 20, 2012 1:19 pm
Location: Ipswich,United Kingdom

Re: Overclocking BSOD code list/help

Post #4 by SuffolkBoy » Thu Apr 24, 2014 1:04 pm

extremely handy! Nice one..
i7 2600k@4.5||Maximus V Formula||MSI Gaming 390X||16Gb TeamgroupExtreme 2600||Corsair H105||Phanteks Enthoo Pro M

User avatar
SuffolkBoy
El Presidente
El Presidente
Posts: 1585
Joined: Tue Nov 20, 2012 1:19 pm
Location: Ipswich,United Kingdom

Re: Overclocking BSOD code list/help

Post #5 by SuffolkBoy » Thu Apr 24, 2014 4:57 pm

Think this warrants a move to the Guides section ?? Huddy ??
i7 2600k@4.5||Maximus V Formula||MSI Gaming 390X||16Gb TeamgroupExtreme 2600||Corsair H105||Phanteks Enthoo Pro M

User avatar
huddy
Lieutenant
Lieutenant
Posts: 2459
Joined: Mon Nov 19, 2012 9:11 pm
Location: Chelmsford UK
Contact:

Re: Overclocking BSOD code list/help

Post #6 by huddy » Thu Apr 24, 2014 5:23 pm

Great article 8-)

User avatar
nickolp1974
Officer Cadet
Officer Cadet
Posts: 1836
Joined: Wed Apr 23, 2014 7:08 pm
Location: In the Pub

Re: Overclocking BSOD code list/help

Post #7 by nickolp1974 » Sun Nov 02, 2014 9:09 pm

A little has-e info added
Image

User avatar
ALXAndy
Warrant Officer
Warrant Officer
Posts: 1302
Joined: Tue May 06, 2014 9:00 pm

Re: Overclocking BSOD code list/help

Post #8 by ALXAndy » Fri Nov 21, 2014 12:00 am

Very helpful I approve !
Alienware Area 51 2014.
Image

User avatar
TX-OC
Private
Private
Posts: 50
Joined: Sun May 31, 2015 2:11 pm
Location: UK

Re: Overclocking BSOD code list/help

Post #9 by TX-OC » Sun May 31, 2015 6:25 pm

Nice! This is very useful!
Lenovo T430
1600x900 60hz (internal) + 1680x1050 120hz (external)
500gb 850 EVO
Core i5-3320M
HD 4000 + HD7970 MATRIX EGPU [GDC Beast]

Steering wheel: Logitech Driving Force GT


Return to “Useful Guides”




  Who is online

Users browsing this forum: No registered users and 1 guest

cron