The Drive of ADS1220

Discuss all PC hardware news, reviews, problems etc.
Posts: 4
Joined: Wed May 17, 2017 10:48 am

The Drive of ADS1220

Post #1 by johnwalker » Thu May 18, 2017 1:06 pm

The device supports measurements of pseudo- or fully-differential signals when using the PGA. Alternatively, the device can be configured to bypass the internal PGA while still providing high input impedance and gains up to 4 V/V, allowing for single-ended measurements.
At present, The MCU I used is freescale ZVH128 while spi is used to drive ADS1220. The buad rate of spi I set is 1M. The SPI outputted signal is normal as well as the SCK signal when I observe it by oscilloscope. But The return signal of ADS1220 can’t be read out. What troubles occurred? I have review it and read its data-sheet several times. I don’t know how to solve it.
Could anyone here help me? Thanks a million.

I didn't find the right solution from the Internet.

Launch Video Example

Return to “PC Hardware”

  Who is online

Users browsing this forum: No registered users and 4 guests