My First LN2 Bench

[meankeys]

My first time using LN2. Was fun learned a bit. Could use some advice.
My bench was a M8E 6700K I managed 5800 @ 1.776v. A poor sample or poor knowledge. If I run coder than - 90 she would not post.

I believe I had a good mount and my board prep held up very nice.

http://valid.x86.fr/r46m8j

[Jumper118]

nice one.

[nickolp1974]

Good stuff MK try 1.65v DMI volts, 1.45v PLL termination, 1.28v vccio and about 2.1v on core PLL, my memories a little vague now but if your still struggling after that give Luumi a shout, i used upto 1.94v on vcore

[meankeys]

Thanks for the input guys. I will give it a try
Thank you