[code][/code]

Dram tuning Show Your Aida Cache Setting

The place to discuss all topics relating to Motherboards and RAM.
User avatar
Henkenator68NL
Lance Corporal
Lance Corporal
Posts: 120
Joined: Mon Oct 13, 2014 9:13 pm
Location: The Netherlands
Contact:

Re: Dram tuning Show Your Aida Cache Setting

Post #26 by Henkenator68NL » Sun Apr 26, 2015 4:38 pm

@Whyscotty:

Very Nice did you do anything voltage wise? or at stock voltages


[tab=30][tab=30]Image
Image
[tab=30][tab=30][tab=30]https://www.youtube.com/channel/UCGILH-TAxOozS67iX3HXDiw
[tab=190]Carpe Diem

User avatar
whyscotty
Warrant Officer
Warrant Officer
Posts: 1013
Joined: Thu Apr 24, 2014 7:44 am
Location: WIGAN . UK

Re: Dram tuning Show Your Aida Cache Setting

Post #27 by whyscotty » Sun Apr 26, 2015 6:48 pm

► Show Spoiler
6900K - 4.4 :D
Asus X99 Strix
Corsair ROG Dom Plats 3200
Intel 750 400GB
1080 Classified
Phantek Glass

User avatar
Henkenator68NL
Lance Corporal
Lance Corporal
Posts: 120
Joined: Mon Oct 13, 2014 9:13 pm
Location: The Netherlands
Contact:

Re: Dram tuning Show Your Aida Cache Setting

Post #28 by Henkenator68NL » Mon Apr 27, 2015 11:47 am

@Whyscotty Thanks for sharing!

In general the VCCIO Analog can be lower than the VCCIO Digital to function properly. (often 0,05 Volts less than VCCIO Digital is sufficient ).

If you haven't touched any timings yet, you could try upping the frequency 1 notch and see if it will post/boot . A lot of ram kits wil do a higher notch without (massive ) high Voltage. If it does , check AIDA CacheMem results to see difference.

Request to all:
If you post a lot of images "hide them as spoiler"
Place these commands around the image:

Code: Select all

[spoil]
Your image

[/spoil]


That keeps the thread a lot easier to read
[tab=30][tab=30]Image
Image
[tab=30][tab=30][tab=30]https://www.youtube.com/channel/UCGILH-TAxOozS67iX3HXDiw
[tab=190]Carpe Diem

Zyprexa-LWD
Cadet
Cadet
Posts: 17
Joined: Fri Oct 31, 2014 8:08 pm
Location: Netherlands Friesland Leeuwarden

Re: Dram tuning Show Your Aida Cache Setting

Post #29 by Zyprexa-LWD » Wed May 06, 2015 3:10 am

Hello everyone

I m a beginner at OC
Here is a screenshot with XMP profile 1

https://www.dropbox.com/s/pdogia5dmhzrn ... e.png?dl=0

And here a screenshot after a visit of my dear friend and mentor HENKENATOR68NL
henk gave me and my DRAM a lesson of tweaking

https://www.dropbox.com/s/imqi435j63vah ... g.png?dl=0
Image

Arne Saknussemm
Warrant Officer
Warrant Officer
Posts: 1126
Joined: Thu Oct 09, 2014 6:39 pm

Re: Dram tuning Show Your Aida Cache Setting

Post #30 by Arne Saknussemm » Fri May 08, 2015 7:30 pm

Cool...in good hands with Henk! keep tweaking :D

My latest .....

Image
Last edited by Arne Saknussemm on Thu May 14, 2015 6:37 pm, edited 1 time in total.

User avatar
jab383
Private
Private
Posts: 45
Joined: Fri Nov 21, 2014 4:58 pm
Location: Texas, USA

Re: Dram tuning Show Your Aida Cache Setting

Post #31 by jab383 » Thu May 14, 2015 3:02 pm

The 3770K and POS motherboard now on my bench will not work over DDR3-2400, so this is the best RAM tuning found so far.

https://www.dropbox.com/s/dj706gh5egyeg ... P.jpg?dl=0

Arne Saknussemm
Warrant Officer
Warrant Officer
Posts: 1126
Joined: Thu Oct 09, 2014 6:39 pm

Re: Dram tuning Show Your Aida Cache Setting

Post #32 by Arne Saknussemm » Fri May 15, 2015 12:19 pm

Image

Silent_Scone
Private
Private
Posts: 69
Joined: Fri May 02, 2014 1:16 pm

Re: Dram tuning Show Your Aida Cache Setting

Post #33 by Silent_Scone » Fri May 15, 2015 5:12 pm

My daily overclock :)

Uncore @ 4.0 (1.275v - not particularly strong at all but stable)

Core @ 4.4 (1.2v)

GSkill F4-3200C16Q @ 3200 - CAS16-16-16-36-1T @ 1.36v

Image

User avatar
Henkenator68NL
Lance Corporal
Lance Corporal
Posts: 120
Joined: Mon Oct 13, 2014 9:13 pm
Location: The Netherlands
Contact:

Re: Dram tuning Show Your Aida Cache Setting

Post #34 by Henkenator68NL » Sun May 24, 2015 8:00 am

That is great!

Must love that X99

@Zyprexa-ldw cq Sander: thanks my friend happy to help and share what I have learned!
[tab=30][tab=30]Image
Image
[tab=30][tab=30][tab=30]https://www.youtube.com/channel/UCGILH-TAxOozS67iX3HXDiw
[tab=190]Carpe Diem

Arne Saknussemm
Warrant Officer
Warrant Officer
Posts: 1126
Joined: Thu Oct 09, 2014 6:39 pm

Re: Dram tuning Show Your Aida Cache Setting

Post #35 by Arne Saknussemm » Sun Jun 14, 2015 5:03 pm

Latest...copy down, everything else higher and faster :-)

Image

User avatar
Flexnl
Lance Corporal
Lance Corporal
Posts: 132
Joined: Mon Oct 13, 2014 1:00 am

Re: Dram tuning Show Your Aida Cache Setting

Post #36 by Flexnl » Sat Sep 12, 2015 7:55 am

wow lekkere 4790K Henk... :)
Waar heb je die gekocht/besteld?

User avatar
whyscotty
Warrant Officer
Warrant Officer
Posts: 1013
Joined: Thu Apr 24, 2014 7:44 am
Location: WIGAN . UK

Re: Dram tuning Show Your Aida Cache Setting

Post #37 by whyscotty » Fri Sep 18, 2015 1:18 pm

Image
6900K - 4.4 :D
Asus X99 Strix
Corsair ROG Dom Plats 3200
Intel 750 400GB
1080 Classified
Phantek Glass

User avatar
nickolp1974
Officer Cadet
Officer Cadet
Posts: 1836
Joined: Wed Apr 23, 2014 7:08 pm
Location: In the Pub

Re: Dram tuning Show Your Aida Cache Setting

Post #38 by nickolp1974 » Wed Oct 07, 2015 9:19 pm

Trying to determine if i should get new sticks as these team extreems are causing problems with benchmarks that require stabillity, if anyone has the new ripjaws or tridents can you post same speed if possible please. Cpu at stock.
Voltages used-
Dram 1.68v
SA 1.27
VCCIO 1.2

Image
Image

Doug2507
Private
Private
Posts: 71
Joined: Fri Oct 02, 2015 7:03 am

Re: Dram tuning Show Your Aida Cache Setting

Post #39 by Doug2507 » Fri Oct 09, 2015 7:42 am

Image

Very rough tune, will spend time today tweaking including vDIMM. I'll also run with AIDA and put clocks to stock.
Image

User avatar
nickolp1974
Officer Cadet
Officer Cadet
Posts: 1836
Joined: Wed Apr 23, 2014 7:08 pm
Location: In the Pub

Re: Dram tuning Show Your Aida Cache Setting

Post #40 by nickolp1974 » Sat Oct 10, 2015 3:06 pm

Image
Image

Doug2507
Private
Private
Posts: 71
Joined: Fri Oct 02, 2015 7:03 am

Re: Dram tuning Show Your Aida Cache Setting

Post #41 by Doug2507 » Sat Oct 10, 2015 3:19 pm

Are we posting on stock clocks? Be good if we all stuck to the same clocks for comparison...? Or 45/45?
Image

User avatar
nickolp1974
Officer Cadet
Officer Cadet
Posts: 1836
Joined: Wed Apr 23, 2014 7:08 pm
Location: In the Pub

Re: Dram tuning Show Your Aida Cache Setting

Post #42 by nickolp1974 » Sat Oct 10, 2015 5:46 pm

Doug2507 wrote:Are we posting on stock clocks? Be good if we all stuck to the same clocks for comparison...? Or 45/45?



You call it Doug, I'm easy, IMO 45/45 which most chips(x99/z170/z97) will do be good to compare all platforms??
Image

Doug2507
Private
Private
Posts: 71
Joined: Fri Oct 02, 2015 7:03 am

Re: Dram tuning Show Your Aida Cache Setting

Post #43 by Doug2507 » Sat Oct 10, 2015 5:54 pm

Sure, sounds good. :)
Image

Doug2507
Private
Private
Posts: 71
Joined: Fri Oct 02, 2015 7:03 am

Re: Dram tuning Show Your Aida Cache Setting

Post #44 by Doug2507 » Sat Oct 10, 2015 6:04 pm

Took some time out from family duties today and started testing all sticks i've got of G.skill. Initial testing a fews days back with the 1st two sticks out of a quad pack gave 11-18-18-28-1T 3600@1.87v. Checked these sticks today (changed tcwl from 11 to 9) and did the same at 1.86v.

Moved onto the rest of the sticks, tested individually. (quad 3466, dual 3466, dual 3600). Apart from those 1st two sticks, only one other managed close @1.87v. Next was 1.92v and the rest i gave up at 1.95.

Decided to test in pairs, put both 3600 sticks in and found repeated running of 32m brought the vDIMM down after a few runs. Now have both 3600 sticks running above timings at 1.88v. Can't get my head around it but appears they like to be broken in, if such a thing exists.

Screen of 3600 @1.88v. I'll change clocks to 45/45 for further testing. :)

Image
Last edited by Doug2507 on Sat Oct 10, 2015 6:14 pm, edited 1 time in total.
Image

User avatar
Rauf
Lance Corporal
Lance Corporal
Posts: 158
Joined: Tue May 19, 2015 8:40 pm
Location: Sweden

Re: Dram tuning Show Your Aida Cache Setting

Post #45 by Rauf » Sat Oct 10, 2015 6:13 pm

nickolp1974 wrote:Image

Nice score. What volts? How's real perf?
Image

User avatar
nickolp1974
Officer Cadet
Officer Cadet
Posts: 1836
Joined: Wed Apr 23, 2014 7:08 pm
Location: In the Pub

Re: Dram tuning Show Your Aida Cache Setting

Post #46 by nickolp1974 » Sat Oct 10, 2015 6:31 pm

Volts for dram are at 1.94v, not got full stabillity but not far off. Only had an hour or 2 at it so will work some more in the morning, as soon as I can get it stable enough I'll use the last of my LN2, only have about 10L and not posted a score for geekbench yet! And there's a couple I need to improve. I'll most likely drop bclk back to 100 and make 3866 rock solid.
Perf in general is only a bit better than 3600C12 so it may or may not be worth the extra strain/voltage yet.
Image

Doug2507
Private
Private
Posts: 71
Joined: Fri Oct 02, 2015 7:03 am

Re: Dram tuning Show Your Aida Cache Setting

Post #47 by Doug2507 » Sun Oct 11, 2015 11:42 pm

I'm getting pretty much the same in XTU with 3600c11 Nick. 1543 without optimisation (only ran once). Read/write/copy is circa 52/55/49. (win 7 64 full retail). I'll have play about with a different OS, optimise then check 3466/3600/3733. Pi was just under 6m50s.
Image


Return to “Motherboards & RAM”




  Who is online

Users browsing this forum: No registered users and 1 guest